31-101 Palm coated glove



  • Style No.:                    31-101
  • Liner Material:           White polyester
  • Liner Construction:   String knitted
  • Coating Material:       Polyurethane rubber
  • Palm Finish:               Smooth
  • Wrist:                           Knit wrist
  • Coating Style:              Fingertip and palm coated
  • Liner Gauge:                13
  • Weight:                         26 grams
  • Available Sizes:           5/XXS, 6/XS, 7/S, 8/M, 9/L, 10/XL, 11/XXL
  • Typical Packing:         12 pairs per poly bag, 240 pairs for one carton
  • Quality Level:              As per customer requirement

PU palm coated gloves, another name polyurethane palm coated glove,  are constructed with string knit liner and PU palm coating. The liner yarn material can be either polyester or nylon. Polyester and nylon yarn look quite same but quite different in terms of abrasion resistance and cost. Nylon is a better yarn than polyester when used on coated gloves which is more abrasion resistant and more flexible, but the cost is also high. Just because of it’s higher cost than polyester, twice more than polyester, more than half nylon yarns used for gloves are substituted by polyester.

Variety of liner colors are available for clients to choose. Some typical liner color has white, grey, black etc. Color has some influence on the cost of  13 gauge polyester palm coated glove. White polyester is the cheapest; Typical color polyester like grey, red and black is around USD 0.15/dz higher than white. The other uncommon color like dark blue is USD 0.03/dz higher than typical color polyester. If you want a customized color designated by you, your quantity has to be big to get started. Yarn dying is not workable with smaller quantity. 

The liner of PU palm coated glove can be knitted with 13 gauge, 15 gauge and 18 gauge, among which 13 gauge is the most typical one and 18 gauge is ultra thin. Just like the liner of nitrile coated glove, the liner of PU palm coated glove can also be printed with a certain kind of pattern for a good look. The print pattern is variable and you choose whatever you like. When the liner is mixed with carton fiber, the glove will have the anti-static function. The cut resistant glove with PU coating is the most common one under cut resistant glove category. See this glove in our cut resistant glove category.

We provide a full set of sizes for this glove from size 5 to size 12, among which size 6 and size 5 is for kids. You can choose a liner pattern that is for kids. The following table is our general style list for this glove instead of a complete list.


31-101  White polyester liner, palm coated with white polyurethane

31-102  Grey polyester liner, palm coated with grey polyurethane

31-201  White nylon and carbon fiber mixed liner, palm coated with white polyurethane, anti-static

32-101  Blue nylon liner, palm coated with black polyurethane, ultra thin

31-301  Printed polyester liner, palm coated with white polyurethane, garden use


Above is DMF-based polyurethane, the other type of PU coating is water-based which does not contain DMF but more expensive.